[vpnc-devel] vpnc problem

[David H. Askew]

it looks like maybe your default gateway isn't set right ...

why didn't you run vpnc-connect ? ... instead of vpnc ... 

is should set your default route for you ... 

On 09:12 Sat 13 Aug     , sunwei wrote:
> Hi David,
> 
> Thank you very much for your quick reply!
> 
> In fact, what I can do is only ping the inner address
> 3.7.206.72. Ping other address such as 3.36.220.47 does
> not work. It seems like a route table problem. But I do
> not know how  to check it.
> 
> Regards
> sunwei
> 
> 
> ????????????????????:
> >From: "David H. Askew" <dhaskew at earthlink.net>
> >Reply-To: 
> >To: sunwei <sunwei at tsinghua.org.cn>,
> vpnc list to send bug reports and discussions with developers
> <vpnc-devel at unix-ag.uni-kl.de>
> >Subject: Re: [vpnc-devel] vpnc problem
> >Date:Fri, 12 Aug 2005 17:27:49 -0400
> >
> >
> > Can you give us a more concrete example of something you can't do .... ?
> > 
> > On 00:25 Sat 13 Aug     , sunwei wrote:
> > > I installed vpnc0.3.2 on Debian system with linux kernel 2.6.12.
> > > After configurating the "/etc/vpnc/default.conf" file, I can comunicate
> > > with the server. And the IP address of dev tun0 is set correctly as
> following:
> > > 
> > > tun0      Link encap:UNSPEC  HWaddr
> > > 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
> > >           inet addr:3.7.206.72  P-t-P:3.7.206.72  Mask:255.255.255.255
> > >           UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1412  Metric:1
> > >           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > >           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> > >           collisions:0 txqueuelen:500
> > >           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
> > > 
> > > But I still can not access the inner network. Here are the routing table
> > > before and after I run "vpnc".
> > > 
> > > Before:
> > > Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
> > > 220.192.0.10    0.0.0.0         255.255.255.255 UH    0      0        0 ppp0
> > > 132.147.167.0   0.0.0.0         255.255.255.0   U     0      0        0 eth0
> > > 0.0.0.0         220.192.0.10    0.0.0.0         UG    0      0        0 ppp0
> > > 
> > > After:
> > > Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
> > > 220.192.0.10    0.0.0.0         255.255.255.255 UH    0      0        0 ppp0
> > > 198.169.188.174 220.192.0.10    255.255.255.255 UGH   0      0        0 ppp0
> > > 132.147.167.0   0.0.0.0         255.255.255.0   U     0      0        0 eth0
> > > 0.0.0.0         0.0.0.0         0.0.0.0         U     0      0        0 tun0
> > > 
> > > So would you please give me some suggestions?
> > > 
> > > Thanks 
> > > sunwei
> > > 
> > > 
> > > _______________________________________________
> > > vpnc-devel mailing list
> > > vpnc-devel at unix-ag.uni-kl.de
> > > http://lists.unix-ag.uni-kl.de/mailman/listinfo/vpnc-devel
> > > http://www.unix-ag.uni-kl.de/~massar/vpnc/
> > 
> >
>