[vpnc-devel] vpnc-nortel can establish connection but doesn't receive any traffic

[Dick]

I still have the same error (can connect but I can't get any traffic through my
VPN, I've configured the routes correctly and when I change the credentials I
get a message about incorrect credentials.

$ vpnc --debug 2 --no-detach
   
vpnc version 0.5.3

S1 init_sockaddr
 [2009-09-21 21:47:25]

S2 make_socket
 [2009-09-21 21:47:25]

S3 setup_tunnel
 [2009-09-21 21:47:25]
   using interface tun0

S4 do_phase1_am
 [2009-09-21 21:47:25]

S4.1 create_nonce
 [2009-09-21 21:47:25]

S4.2 dh setup
 [2009-09-21 21:47:25]

S4.3 AM packet_1
 [2009-09-21 21:47:25]

S4.4 AM_packet2
 [2009-09-21 21:47:25]
   (unknown)
   (DPD)
   IKE SA selected psk-3des-sha1
   peer is DPD capable (RFC3706)
   NAT status: no NAT-T VID seen

S4.5 AM_packet3
 [2009-09-21 21:47:25]

S4.6 cleanup
 [2009-09-21 21:47:25]

S5 do_phase2_xauth [1]
 [2009-09-21 21:47:25]

S5.1 xauth_request
 [2009-09-21 21:47:25]

S5.2 notice_check
 [2009-09-21 21:47:25]

S5.3 type-is-xauth check
 [2009-09-21 21:47:25]

S5.4 xauth type check
 [2009-09-21 21:47:25]

S5.5 do xauth reply
 [2009-09-21 21:47:25]

S5.2 notice_check
 [2009-09-21 21:47:25]

S5.3 type-is-xauth check
 [2009-09-21 21:47:25]

S5.6 process xauth set
 [2009-09-21 21:47:25]

S5.8 xauth done
 [2009-09-21 21:47:25]

S6 do_phase2_config [1]
 [2009-09-21 21:47:25]

S6.2 phase2_config receive modecfg
 [2009-09-21 21:47:25]
   unknown attribute 6 / 0x6
   unknown attribute 16392 / 0x4008
   unknown attribute 16395 / 0x400B
   unknown attribute 16396 / 0x400C
   unknown attribute 16398 / 0x400E
   unknown attribute 16397 / 0x400D
   unknown attribute 16403 / 0x4013
   unknown attribute 16400 / 0x4010
   got address 10.137.0.24

S6 do_phase2
 [2009-09-21 21:47:25]

do_phase2: S7.5 QM_packet2 check reject offer
 [2009-09-21 21:47:25]

do_phase2: S7.6 QM_packet2 check and process proposal
 [2009-09-21 21:47:25]
   got ipsec lifetime attributes: 28800 seconds
   IPSEC SA selected 3des-md5

do_phase2: S7.1 QM_packet1
 [2009-09-21 21:47:25]

do_phase2: S7.7 QM_packet3 sent - run script
 [2009-09-21 21:47:25]

S7 setup_link (phase 2 + main_loop)
 [2009-09-21 21:47:25]

S7.0 run interface setup script
 [2009-09-21 21:47:25]

S7.8 setup ipsec tunnel
 [2009-09-21 21:47:25]

S7.9 main loop (receive and transmit ipsec packets)
 [2009-09-21 21:47:25]
   remote -> local spi: 0xa5fe3fb6
   local -> remote spi: 0x9304602
VPNC started in foreground...
   lifetime status: 0 of 28800 seconds used, 0|0 of 0 kbytes used
   got late ike packet: 84 bytes
   got r-u-there ack
   lifetime status: 5 of 28800 seconds used, 0|0 of 0 kbytes used
   lifetime status: 5 of 28800 seconds used, 0|0 of 0 kbytes used
   lifetime status: 5 of 28800 seconds used, 0|0 of 0 kbytes used
   lifetime status: 5 of 28800 seconds used, 0|0 of 0 kbytes used
   lifetime status: 5 of 28800 seconds used, 0|0 of 0 kbytes used
   lifetime status: 6 of 28800 seconds used, 0|0 of 0 kbytes used
   lifetime status: 7 of 28800 seconds used, 0|0 of 0 kbytes used
   lifetime status: 7 of 28800 seconds used, 0|0 of 0 kbytes used
   lifetime status: 7 of 28800 seconds used, 0|0 of 0 kbytes used
   lifetime status: 7 of 28800 seconds used, 0|0 of 0 kbytes used
   lifetime status: 7 of 28800 seconds used, 0|1 of 0 kbytes used
   lifetime status: 8 of 28800 seconds used, 0|1 of 0 kbytes used
   lifetime status: 8 of 28800 seconds used, 0|1 of 0 kbytes used
   lifetime status: 8 of 28800 seconds used, 0|1 of 0 kbytes used
   lifetime status: 8 of 28800 seconds used, 0|1 of 0 kbytes used
   lifetime status: 8 of 28800 seconds used, 0|1 of 0 kbytes used
   lifetime status: 9 of 28800 seconds used, 0|1 of 0 kbytes used
   lifetime status: 9 of 28800 seconds used, 0|1 of 0 kbytes used
   lifetime status: 9 of 28800 seconds used, 0|1 of 0 kbytes used
   lifetime status: 9 of 28800 seconds used, 0|1 of 0 kbytes used
   lifetime status: 9 of 28800 seconds used, 0|2 of 0 kbytes used